You are here

Caterpillar C15

Param

Value

Number of cylinders

6

Arrangement of cylinders

рядное

Working cylinder

1-5-3-6-2-4

Diameter of cylinder, mm

137,2

Piston stroke, mm

171,4

Working volume, l

15,2

The compression ratio

18:1

Mode of operation of the engine

A*

B**

C***

D****

E*****

 

Engine power, kW (HP)

328 (446)

354 (481)

403 (548)

433 (589)

444 (603)

 

Crankshaft rotational speed, RPM

1800-2100

1800-2100

1800-2100

1800-2100

1800-2100

 

Idling rotational speed, RPM

 

   - maximum, not more than

2310

    -minimum, not more than

700

Specific fuel consumption at 1800 rpm, g/(kW/h):

 

   -at 100% power:

217,5

н.д.

227,7/ н.д.

н.д.

 

Specific oil consumption through burning, no more g/(kW/h)

0,487

Oil filters

полнопоточный со сменным фильтрующим элементом

Fuel pump

низкого давления

Fuel filters

 

   - coarse

сепаратор

   - fine cleaning

высшего качества, 2 мкм

Supercharging

Турбонаддув с системой охлаждения наддувочного воздуха атмосферным воздухом

Intrekuler (for station)

да

Cooling system

Одноконтурная система охлаждения водяной рубашки двигателя

The amount of cooling system, l

21.9******

Water pump

центробежный водяной насос рубашки охлаждения с шестеренчатым приводом

The charging generator

24 В, 60 А

Starter

электростартер, 24 В

Overall dimensions (lxwxh), mm

1782х821х1229

Mass, kg

1469*******

* Mode of IND-A (continuous operation)-continuous mode heavy duty engine when the engine is operated at maximum power and maximum speed up to 100% of the time, without interruption or intermittent load reduction.

* * IND-Mode B-mode operation of the engine, where the power and (or) rotational speed periodically reduced in comparison with the maximum value (duration of work at full throttle does not exceed 80% of the total work time)

Treatment IND-c (intermittent mode)-motor operation with periodic increases in power and speed to the maximum value (duration of work at full throttle does not exceed 50% of the total work time)

D-IND-mode operation of the engine, allowing periodic increases up to the maximum value (duration of operation at full load, not exceeding 10% of the total work time)

IND-E mode-this mode is used when maximum power is required for a short period of time to start or when sudden overload. For emergency operating mode in which the normal power level is not sufficient (duration of work at full throttle does not exceed 5% of the total work time).

without the filling level of the radiator * * * * * * * dry weight engine